HVAC: Heating Ventilating and Air Conditioning System User Guide

Author of this article BGD:
HVAC engineers' or technicians', everyone need some engineering books in his/her self. I am sure this HVAC book store will help you in your workplace when you need some reference to your HVAC equipment installation, maintenance or troubleshooting. 

Carrier Reciprocating Liquid Chillers

Carrier Screw Chillers User Manual

Danfoss Air-conditioning Control System

McQuay HVAC Manual and Engineering Information

Trane HVAC Manual and Engineering Information

Taco HVAC Manual and Engineering Information

Control of HVAC System Manual and Engineering Information

IOM (Installation, Operation & Maintenance) of HVAC System Manual and Guide Books

Omega Lubricant for HVAC System Manual and Guide Books

Parts List of HVAC System Manual and Guide Books

PID Control of HVAC System Manual and Guide Books

Different Refrigerant Uses in HVAC System


Wiring Diagram of HVAC System


HVAC Design and Working Principle Basic Presentation


HVAC Text Books in Arabic Language

Reactions: Location: United Arab Emirates

Comments

Post a Comment

WAZIPOINT:
Thank you very much to visit and valuable comments on this blog post. Keep in touch for next and new article. Share your friends and well-wisher, share your idea to worldwide.

Popular posts from this blog

All Bangla Newspaper

Author of this article BGD:
Image
Bangladeshi all Bangla Newspaper List
aBangladeshi all national and regional newspaper in one page, you can read by single click.

বিবিসি বাংলা

All Bangla Regional NewspaperYou also find Bangladeshi all regional newspapers. If you find missing your-one, please feel free to comments below, we will try to include. We want to present you all Bangla newspaper in one page, read any one by single click.
Read more

You Should Know all About Fire Extinguisher Using Guide

Author of this article BGD:
Image
Firefighting and Portable Fire Extinguisher Using GuideMillions of fire incident happening each year at the workplace in the world, resulting of huge casualties and deaths. Just being familiar and follow the simple firefighting and fire extinguisher using basic guidelines, it’s possible to save valuable life and properties. Including all working personnel in the workplace, everybody should know the basic rules to use fire extinguisher and evacuate procedure if fired in anywhere. Types of Fire ExtinguishersTypes of fire extinguishers are not same for every country. Someone follow their own standard, but NFPA standards are very well known and followed by many countries.











The types of fire extinguisher defined as the types of fire or the class of fire, such as Class A, class B, Class C, Class D and Class K

Type A: Class A fires that involved with normal combustible materials like wood, paper, trash, cloth, different types of plastic or rubber etc. The fire extinguisher that used to extingui…
Read more

WHAT IS PCD (PITCH CIRCLE DIAMETER)?

Author of this article BGD:
Image
How to Calculate PCD (Pitch Circle Diameter)?
PCD is the short form of Pitch Circle Diameter; the Pitch Circle Diameter (PCD) is the diameter of that circle which passes through the center of all the bolts hole or wheel bolts or wheel rim holes or stud. The best example is Flanges, there are multiple holes in Flanges, the circle through the center of these holes is known as pitch circle and the diameter of this circle is known as Pitch Circle Diameter, in short PCD. Look at the figures and find PCD of different stud arrangement circle.
Studs: from the definition of stud is “a large-headed piece of metal that pierces and projects from a surface, especially for decoration”, shown in figure as different form of stud arrangement, such- 3 stud means 3 holes; 4 stud means 4 holes; 5 stud means 5 series of holes and so on.
Pitch circle: The transverse section of the pitch cylinder normal to the axis.
Pitch, Circular: The distance measuring along the pitch circle between the cen…
Read more

Dielectric Loss Calculation for XLPE Insulated Single Core Copper Cable

Author of this article BGD:
Image
Dielectric loss calculation means the calculation of electromagnetic energy loss as inherent dissipation of dielectric material. 
Dielectric loss is represents as tan δ widely known asloss angle or loss tangent. An example to calculate Dielectric Loss for 132 kV XLPE single core copper conductor cable: Above formula shows the calculated dielectric loss for mentioned cable is 0.38 watt per meter. Where the parameters used to calculate this value are shown. Rated voltage 132 kV, so, phase to earth voltage is 76.2 kV or 76,200 volt (132/sq. root 3); Insulation thickness 18 mm (outer diameter – inner diameter)/2 or (74.5-38.5)/2; Value of loss angle tan δ depends on type of material.
What Is XLPE?
XLPE is the shorten of Crossed Link Polyethylene,Cross-Linked Polyethylene (XLPE) is modified three-dimensional molecular Polyethylene structurethat is manufactured from polyethylene plastic to improve some specific properties like- heat deformation, smokeless during fire, abrasion, continuous work at…
Read more

Star Delta Starter Line Diagram and Its Working Principle

Author of this article BGD:
Image
What is Star Delta Starter for Motor Starting?
Star-Delta starter is an electrical motor starting device, generally uses in big size motor to overcome some technical limitation. Star and Delta means here 2 separate states of motor running, first Star connection and then Delta connection.
The starting current of any heavy electric motor can be more than 4 times the normal load current it draws when it has gained speed and has reached its normal running condition. 

To overcome this initial high current enchanting problem, such arrangement needs Star connection at starting time and if Star connection has sufficient torque to run up to 75% to %80 of full load speed, then the motor can be connected in Delta mode.
When the motor connected to Delta configuration the phase voltage increases by 173% and phase currents increase by the same ratio. The line current increases three times its value in star connection. What Problem Starting Motor without Star-Delta?We already know, if the motor starts si…
Read more

COMPRESSOR OF CENTRIFUGAL WATER CHILLER

Author of this article BGD:
Image
Compressor of Centrifugal Water Chiller The vapor-compression refrigeration cycle in water chillers vary by the type of compressor used in it. As per size of chillers following type of compressors typically use:
For small size chillers: Reciprocating and scroll type compressors.  For Medium size chillers: Helical-rotary or screw type compressors.  For large size chillers: Centrifugal type compressors.
Centrifugal water chillers can also be divided into two types based on the method used to reject heat to the atmosphere: 

Water-Cooled or Air-cooled. Most centrifugal chillers are water-cooled. Water-cooled centrifugal chillers are generally available from 100 to 3,000 tons [350 to 10,500 kW] as prefabricated machines, and up to 8,500 tons [30,000 kW] as built-up machines.
This particular centrifugal water chiller makes use of a shell-and-tube evaporator where refrigerant absorbs heat from the water flowing through the tubes. The compressor is made up of 1 or more centrifugal impellers. A second…
Read more

Safety Clearance to Exposed Live Conductors

Author of this article BGD:
Image
Working Safety Clearance and Phase Gap between Exposed Live Conductor
Herein this article we will focus on “safety clearance to live bare live conductors during working in electrical power distribution substations or switching stations” and “phase gap or safety clearance to electrical energy transmitting energized conductors between others power conductors, communication conductors or transportation navigation system” to ensure safety for human and property, as well as operate a proficient electrical energy network system. Lines crossing or approaching each other as pe Bangladesh Electricity Distribution Code(1) Where an overhead line crosses or is in proximity to any telecommunication line, either the owner of the overhead line or the telecommunication line, whoever lays his line later, shall arrange to provide for protective devices or guarding arrangements, in a manner laid down in the Code of Practice or the guidelines in this respect, if any, and subject to the following provisions…
Read more

HOW CALCULATE CAPACITANCE OF TWO PARALLEL CABLES

Author of this article BGD:
Image
How Calculate Capacitance of Underground Power Cable?Capacitor is nothing but a two parallel metal plate separated by a dielectric that store electrical energy; formally we can define capacitor is a passive two terminal electrical component that used to store energy electrostatically in electric field, it also known as condenser. Practically a capacitor usually used a thin films of metal, aluminum foil or disks, etc.

The property of capacitor is known as capacitance, means the capacitance is the ability of a body to store an electric charge. The unit of capacitance is farad, symbol of farad is F, mostly common is micro farad µF.
The formula to calculate the capacitance between two cables is as C = (Permittivity*Area)/D,
Where, A is the area is that of one cable, D is the distance between the center of the cable and the permitivity is that of the material between the cables.
Capacitance may measure as C= Q/V= Charge/Potential difference.

How Calculate Single Core CableLet,r = radius of the i…
Read more

Why Power Cable Test After Installation

Author of this article BGD:
Image
Power Cable Test After Installation HV/EHV power cable testing at field after installation is the common requirements of cable user. While MV-normal voltage, HV-high voltage and EHV-extra high voltage power cables are carefully tested by the manufacturer before consignment with AC-alternating or DC-direct voltage. 

Some defects may not be detected or, more likely, damage may occur during shipment handling, carrying to storage and site, or during installation. To make over-sure additional testing carry out after installation and prior to being placed in service, including joints and terminations, may be conducted. 

Moreover, many users find that, gradually cable systems degrade and service failures which become troublesome for them. Due to that they desire to reduce or eliminate those failuresperforming periodic tests after some time in service. Determining the economic replacement of downgraded cable, users need special diagnostic test.
Power cable test in field after installation may be …
Read more

Tube Light Wiring Diagram with Capacitor

Author of this article BGD:
Image
How Wire the Tube Light?A tube light or florescent tube wiring is simple but we frequently face the questions with the issues-how to wire fluorescent lights to plug?, how find double tube light connection diagram, tube light connection with electronic choke, tube light connection with choke and starter, tube light connection with capacitor, how to wire a fluorescent light fixture with a diagram?, how to assemble tube light? and so on.
Okay, let’s know first why florescent tube still need where CFL lamps; LED lamps are available. Actually, CFL and LED lighting products are produced in large scale but LED lights cannot replace tube lights thoroughly, because the tube light gives smooth bright light, but till now LED can’t.
Low pressure mercury vapor gas discharge lamp or the tube light is called as fluorescent light and mostly produce white light that can lights last longer than CFL or LED.
Schematic Wiring Diagram for Two Tube Light with One Ballast (Choke).


Here in this tube light wiring…
Read more