Wazipoint System Awarded the DCCI Kitchen and Dining Interior Construction

 

Project Confirmation: WAZIPOINT SYSTEM & DCCI

Project: DCCI Kitchen and Dining Interior Construction Contractor: Wazipoint Scope Summary: Interior finishing works for kitchen and dining area as awarded; all works to be executed as per the site engineer's instructions and to relevant standards.

Scope of Works Itemized

tem No	Description	Specification	Unit	Quantity
1	Tile Installation	2' x 2' tiles using existing tiles; include patent stone for slope	m²	To be measured on site
2	Net Cement Finishing with Coloring	Cement screed finish with color matching as directed by engineer	m²	To be measured on site
3	Aluminum Sliding Window	Silver color; 1.2 mm section; 5 mm glass; install per engineer	Each	As per site requirement
4	False Ceiling	Zipsum board false ceiling; install per engineer's directions	m²	To be measured on site
5	Aluminum Sliding Door	1.5 mm section; Mercery glass; install per engineer	Each	As per site requirement
6	Painting Finishing	Berger or Robbialac; 3 coats; surface prep and finish per engineer	m²	To be measured on site
7	Basin Reinstallation	Remove, re-level, and reinstall basin; plumbing check per engineer	Each	As required
8	Table and Chairs Repair	Repair structural and finish defects; match existing finish	Lot	As required

Technical Requirements and Quality Standards

• Engineer Direction: All works to follow instructions and approvals from the site engineer before execution and at key milestones.
• Tile Works: Ensure existing tiles are inspected for soundness; replace broken tiles only after engineer approval; maintain slope using patent stone to ensure drainage.
• Cement Finishing: Use approved cement mix and pigment; achieve uniform color; cure as per standard practice.
• Aluminum Works: Use specified section thicknesses; ensure frames are plumb and square; glazing to be sealed and weatherproofed.
• False Ceiling: Zipsum board fixed to manufacturer recommendations; provide neat joints and suitable access panels where required.
• Painting: Surfaces to be prepared, primed where necessary; apply three coats of specified brand; final shade to be approved on site.
• Fixtures and Furniture: Reinstall basin with leak test; repair table-chairs to be structurally sound and finish-matched.

Assumptions, Exclusion, and Safety

• Assumptions: Quantities will be finalized after site measurement; existing tiles are reusable unless damaged.
• Exclusions: Major structural alterations, new plumbing rerouting beyond basin reinstallation, electrical rewiring, and supply of new furniture unless specified.
• Safety: Contractor to follow site safety rules, provide PPE, and ensure safe disposal of debris.

Deliverables Acceptance and Handover

• Progress Checks: Engineer inspection and sign-off at completion of tile laying, ceiling installation, glazing, and final painting.

• Testing: Water tightness test for basin; functional check for sliding windows and doors.

• Handover: Clean site, touch-up finishes, provide warranty period, and maintenance recommendations.

Next Steps

• On-site Measurement: Conduct detailed measurement and prepare the final BOQ and price schedule.

• Approval: Submit material samples and color swatches for engineer's approval.

• Schedule: Prepare a work program with milestones and submit for engineer's review.

• Point of Contact: Provide the site supervisor's name and contact for coordination.

Prepared for: DCCI Kitchen and Dining Interior Construction Project by WAZIPOINT SYSTEM.