WAZIPOINT Engineering Science & Technology: List Of All International Standard

Saturday, March 9, 2019

List Of All International Standard

The IEC has now more than 10 000 valid publications in its library.

In 2017, 841 publications were issued, including 507 IEC International Standards, 44 Technical Specifications, 71 Technical Reports, 9 Publicly Available Specifications, and 3 Guides, as well as 207 publications developed outside of the IEC.

Within the four IEC CA Systems, certification bodies issued around 100 000 certificates in 2017, covering a large number of different technologies, products, systems, and services as well as the competence of persons undertaking key roles including maintenance and repair.

What is Standard?


Standard is something what is used as a model of measure or comparative calculations; heartily, a standard is doing something agreed with a mass way. It could be applicable for an industrial product, services of an organization or managing a process.

List of Standards Organizations

There are so many standard organizations who develop and coordinate to implement in practical way. Some of them are as below:
3GPP — 3rd Generation Partnership Project
3GPP2 — 3rd Generation Partnership Project 2
Accellera — Accellera Organization
A4L — formerly known as the Schools Interoperability Framework
AIIM — Association for Information and Image Management
ASAM - Association for Automation and Measuring Systems - Automotive technology
ASME — formerly The American Society of Mechanical Engineers
ASTM International
ATIS - Alliance for Telecommunications Industry Solutions
AUTOSAR — Automotive technology
BIPM, CGPM, and CIPM — Bureau International des Poids et Mesures and the related organizations established under the Metre Convention of 1875.
Cable Labs — Cable Television Laboratories
CCSDS — Consultative Committee for Space Data Sciences
CISPR — International Special Committee on Radio Interference
CFA — Compact flash association
DCMI — Dublin Core Metadata Initiative
DMTF — Distributed Management Task Force
Ecma International — Ecma International (previously called ECMA)
EKOenergy — EKOenergy Network managed by environmental NGOs
FAI — Fédération Aéronautique Internationale
GS1 — Global supply chain standards (identification numbers, barcodes, electronic commerce transactions, RFID)
HGI — Home Gateway Initiative
HFSB — Hedge Fund Standards Board
IAU — International Arabic Union
IEC — International Electrotechnical Commission
IEEE — Institute of Electrical and Electronics Engineers
IEEE-SA — IEEE Standards Association
IETF — Internet Engineering Task Force
IFOAM — International Federation of Organic Agriculture Movements
IFSWF — International Forum of Sovereign Wealth Funds
IMS — IMS Global Learning Consortium
ISO — International Organization for Standardization
IPTC — International Press Telecommunications Council
ITU — the International Telecommunication Union
ITU-R — ITU Radio communications Sector (formerly known as CCIR)
ITU-T — ITU Telecommunications Sector (formerly known as CCITT)
ITU-D — ITU Telecom Development (formerly known as BDT)
IUPAC — International Union of Pure and Applied Chemistry
Liberty Alliance — Liberty Alliance
Media Grid — Media Grid Standards Organization
NACE International — formerly known as National Association of Corrosion Engineers
OASIS — Organization for the Advancement of Structured Information Standards
OGC — Open Geospatial Consortium
OHICC — Organization of Hotel Industry Classification & Certification
OMA — Open Mobile Alliance
OMG — Object Management Group
OGF — Open Grid Forum (merger of Global Grid Forum (GGF) and Enterprise Grid Alliance (EGA))
Open Travel Alliance — Open Travel Alliance (previously known as OTA
OSGi — OSGi Alliance
PESC - P20 Education Standards Council
SAI — Social Accountability International
SDA — Secure digital association
SMPTE — Society of Motion Picture and Television Engineers
SSDA — Solid State Drive Alliance
The Open Group — The Open Group
TIA - Telecommunications Industry Association
TM Forum — Telemanagement Forum
UPU — Universal Postal Union
WMO — World Meteorological Organization
W3C — World Wide Web Consortium
WSA — Website Standards Association
WHO standards body
XSF — The XMPP Standards Foundation
FAO standards body

List of All IEC Standard

IEC- International Electrotechnical Commission standard is very important for an engineer to execute any engineering project. The list of IEC standards are as below:
IEC 60027 Letter symbols to be used in electrical technology
IEC 60028 International standard of resistance for copper
IEC 60034 Rotating electrical machinery
IEC 60038 IEC Standard Voltages
IEC 60041 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
IEC 60044 Instrument transformers
IEC 60045 Steam turbines
IEC 60050 International Electrotechnical Vocabulary
IEC 60051 Recommendation for direct acting indicating analogue electric measuring instruments and their accessories
IEC 60055 Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV
IEC 60059 IEC standard current ratings
IEC 60060 High-voltage test techniques
IEC 60062 Marking codes for resistors and capacitors
IEC 60063 Preferred number series for resistors and capacitors
IEC 60061 Lamp caps and holders together with gauges for the control of interchangeability and safety
IEC 60064 Tungsten filament type GLS (General Lighting Solutions) bulbs
IEC 60065 Audio, video and similar electronic apparatus – Safety requirements
IEC 60068 Environmental Testing
IEC 60071 Insulation Co-ordination
IEC 60073 Basic Safety principles for man-machine interface, marking and identification - coding principles for indicators and actuators
IEC 60076 Power transformers
IEC 60077 Railway applications - Electric equipment for rolling stock
IEC 60079 Explosive Atmospheres
IEC 60083 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
IEC 60085 Electrical insulation
IEC 60086 Primary batteries;
IEC 60092 Electrical installations on ships
IEC 60094 Magnetic tape sound recording and reproducing systems
IEC 60095 Lead-acid starter batteries
IEC 60096 Radio-frequency cables
IEC 60098 Rumble measurement on Vinyl Disc Turntables
IEC 60099 Surge arresters
IEC 60119 The Electrical Performance of Semiconductor Rectifiers (Metal Rectifiers)
IEC 60134 Absolute maximum and design ratings of tube and semiconductor devices
IEC 60137 Bushings for alternating voltages above 1000V
IEC 60146 Semiconductor Converters
IEC 60156 Dielectric Strength
IEC 60169 Radio-frequency connectors
IEC 60183 Guide to the selection of high voltage cables
IEC 60188 High-pressure mercury vapour lamps - Performance specifications
IEC 60193 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
IEC 60204 Safety of machinery
IEC 60214 On-load tap changers
IEC 60228 Conductors of insulated cables
IEC 60233 Tests on Hollow Insulators for use in Electrical Equipment
IEC 60238 Edison screw Lamp holders
IEC 60239 Graphite electrodes for electric arc furnaces – Dimensions and designation
IEC 60245 Rubber-Insulated Cables
IEC 60254 Lead-acid traction batteries
IEC 60255 Electrical Relays
IEC 60268 Sound system equipment
IEC 60269 Low voltage fuses
IEC 60270 High-Voltage Test Techniques – Partial Discharge Measurements
IEC 60273 Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000V
IEC 60287 Calculation of permissible current in cables at steady state rating
IEC 60296 Mineral Insulating oils for transformers & switchgear
IEC 60297 Dimensions of mechanical structures of the 482.6 mm (19 in) series
IEC 60298 high voltage switchgear in metallic enclosure
IEC 60308 Hydraulic turbines - Testing of control systems
IEC 60309 Plugs, socket-outlets and couplers for industrial purposes
IEC 60317 Specifications for particular types of winding wires
IEC 60320 Appliance couplers for household and similar general purposes
IEC 60331 Tests for Electric Cables under Fire Conditions
IEC 60332 Flame Retardant vs Fire Rate Cables
IEC 60335 Safety of electrical household appliances
IEC 60364 Electrical installations of buildings
IEC 60397 Test methods for batch furnaces with metallic heating resistors
IEC 60398 Installations for electro heating and electromagnetic processing - General test methods
IEC 60417 Graphical symbols for use on equipment
IEC 60439 Low voltage switchgear and control gear assemblies
IEC 60445 Basic and safety principles for man-machine interface
IEC 60446 Wiring colors
IEC 60457 Method of sampling insulating liquids
IEC 60479 Effects of current on human beings and livestock
IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
IEC 60519 Safety in installations for electro heating and electromagnetic processing
IEC 60529 Degrees of protection provided by enclosures (IP Code)
IEC 60534 Industrial-process control valves
IEC 60539 Directly heated negative temperature coefficient thermistors
IEC 60545 Guide for commissioning, operation and maintenance of hydraulic turbines
IEC 60546 Controllers with analogue signals for use in industrial-process control systems
IEC 60571 Electronic equipment used on rail vehicles
IEC 60574 Audio-visual, video and television equipment and systems
IEC 60598 Luminaires
IEC 60559 Binary floating-point arithmetic for microprocessor systems
IEC 60601 Medical Electrical Equipment
IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards
IEC 60609 Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation
IEC 60617 Graphical symbols for diagrams
IEC 60622 Sealed nickel-cadmium prismatic rechargeable single cells
IEC 60623 Vented nickel-cadmium prismatic rechargeable single cells
IEC 60651 Sound level meters
IEC 60662 High-pressure sodium lamp - Performance specifications
IEC 60664 Insulation coordination for equipment within low-voltage systems
IEC 60669 Switches for household and similar fixed-electrical installations
IEC 60676 Industrial electro heating equipment - Test methods for direct arc furnaces
IEC 60680 Test methods of plasma equipment for electro heat and electrochemical applications
IEC 60683 Test methods for submerged arc furnaces
IEC 60688 Electrical measuring transducers for converting AC electrical quantities to analogue or digital signals
IEC 60694 Common Specifications For High-Voltage Switchgear and Control gear Standards
IEC 60695 Fire Hazard Testing
IEC 60703 Test methods for electro heating installations with electron guns
IEC 60708 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
IEC 60715 Dimensions of low-voltage switchgear and control gear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and control gear installations.
IEC 60721 Classification of environmental conditions
IEC 60726 Dry type power transformers
IEC 60728 Cable networks for television signals, sound signals and interactive services
IEC 60730 Class B certification requirements for appliances.
IEC 60747 Semiconductor devices; Part 1: General
IEC 60748 Semiconductor devices – integrated circuits
IEC 60750 Item designation in electro technology (Withdrawn! This publication has been replaced by IEC 61346-1:1996)
IEC 60760 Flat, quick-connect terminations (merged into IEC 61210:2010-08)
IEC 60774 VHS/S-VHS video tape cassette system
IEC 60793 Optical fibers
IEC 60779 Test methods for electroslag  remelting furnaces
IEC 60801 EMI and RFI Immunity
IEC 60805 Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps
IEC 60809 Filament lamps for road vehicles - Dimensional, electrical and luminous requirements
IEC 60811 Common test methods for insulating and sheathing materials of electric cables and optical cables
IEC 60812 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
IEC 60815 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions
IEC 60825 Laser safety
IEC 60826 Design criteria of overhead transmission lines
IEC 60840 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements
IEC 60849 Sound Systems for Emergency Purposes
IEC 60865 Short Circuit Current: Calculation of Effects
IEC 60870 Telecontrol equipment and systems
IEC 60874 Connectors for optical fibers
IEC 60884 Plugs and socket-outlets for household and similar purposes
IEC TR 60890 A method of temperature-rise verification of low-voltage switchgear and control gear assemblies by calculation
IEC 60898 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations.
IEC 60904 Photovoltaic Devices (Part 1-10).
IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes: IEC 60906-1 for 230 VAC, IEC 60906-2 for 120 VAC, and IEC 60906-3 for safety extra-low voltage (SELV).
IEC 60908 Compact disk digital audio system
IEC 60909 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
IEC 60921 Ballasts for tubular fluorescent lamps – Performance requirements
IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps – Performance requirements
IEC 60939 Passive filter units for electromagnetic interference suppression
IEC 60942 Electroacoustic – Sound calibrators
IEC 60945 Maritime Navigation and Radio communication Equipment and Systems – General Requirements – Methods of Testing and Required Test Results
IEC 60947 Standards for low-voltage switchgear and control gear
IEC 60950 Safety of information technology equipment
IEC 60958 Digital Audio Interface
IEC 60976 Medical electrical equipment – Medical electron accelerators – Functional performance characteristics
IEC 60977 Medical electrical equipment – Medical electron accelerators – Guidelines for functional performance characteristics
IEC 60994 Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
IEC 61000 Electromagnetic compatibility (EMC)
IEC 61008 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
IEC 61009 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBO's)
IEC 61010 Safety requirements for electrical equipment for measurement, control and laboratory use
IEC 61024 Protection of structures against lightning
IEC 61025 Fault tree analysis
IEC 61030 Domestic Digital Bus - a standard for a low-speed multi-master serial communication bus for home automation applications.
IEC 61043 Sound intensity meters with pairs of microphones
IEC 61058 Switches for Appliances
IEC 61071 Capacitors for power electronics
IEC 61084 Cable trucking and ducting systems for electrical installations
IEC 61097 Global maritime distress and safety system (GMDSS)
IEC 61116 Electromechanical equipment guide for small hydroelectric installations
IEC 61131 Programmable Logic Controllers
IEC 61140 Protection against electric shock – Common aspects for installation and equipment
IEC 61149 Safety of mobile radios
IEC 61156 Multicore and symmetrical pair/qud cables for digital communications
IEC 61158 Industrial communication networks – Fieldbus specifications
IEC 61162 Maritime navigation and radio communication equipment and systems, Digital Systems
IEC 61164 Reliability growth – Statistical test and estimation methods
IEC 61167 Metal halide lamps – Performance specification
IEC 61174 Maritime Navigation and Radio Communications, Electronic Chart Display and Information System (ECDIS)
IEC 61194 Characteristic parameters of stand-alone photovoltaic (PV) systems
IEC 61210 Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements
IEC 61211 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air
IEC 61215 Crystalline silicon terrestrial photovoltaic (PV) modules – Design qualification and type approval
IEC 61226 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
IEC 61238 Compression and mechanical connectors for power cables for rated voltages up to 30 kV
IEC 61241 Electrical apparatus for use in the presence of combustible dust
IEC 61277 Terrestrial photovoltaic (PV) power generating systems – General and guide
IEC 61280 Field testing method for measuring single mode fiber optic cable
IEC 61286 Character set with electro technical symbols
IEC 61307 Industrial microwave heating installations – Test methods for the determination of power output
IEC 61308 High-frequency dielectric heating installations – Test methods for the determination of power output
IEC 61326 Electrical equipment for measurement, control and laboratory use – EMC requirements
IEC 61334 Distribution automation using distribution line carrier systems - a standard for low-speed reliable power line communications by electricity meters, water meters and SCADA
IEC 61345 UV test for photovoltaic (PV) modules
IEC 61346 Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations
IEC 61347 Lamp Control gear
IEC 61355 Classification and designation of documents for plants, systems and equipment
IEC 61360 Common Data Dictionary
IEC 61362 Guide to specification of hydraulic turbine control systems
IEC 61363 Electrical installations of ships and mobile and fixed offshore units
IEC 61364 Nomenclature for hydroelectric power plant machinery
IEC 61366 Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents
IEC 61378 Converter Transformers
IEC 61400 Wind turbines
IEC 61427 Secondary cells and batteries for renewable energy storage - General requirements and methods of test
IEC 61429 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
IEC TS 61430 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
IEC TR 61431 Guide for the use of monitor systems for lead-acid traction batteries
IEC 61434 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to designation of current in alkaline secondary cell and battery standards
IEC 61435 Nuclear instrumentation - High-purity germanium crystals for radiation detectors - Measurement methods of basic characteristics
IEC TR 61438 Possible safety and health hazards in the use of alkaline secondary cells and batteries - Guide to equipment manufacturers and users
IEC 61439 Low-Voltage switchgear and control gear assemblies
IEC 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7.2 kV) up to 30 kV (Um = 36 kV)
IEC 61443 Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
IEC 61445 Digital Test Interchange Format (DTIF)
IEC 61452 Nuclear instrumentation - Measurement of gamma-ray emission rates of radionuclides - Calibration and use of germanium spectrometers
IEC 61453 Nuclear instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and routine tests
IEC 61462 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
IEC TS 61463 Bushings - Seismic qualification
IEC TS 61464 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper)
IEC 61466 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V
IEC 61467 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
IEC 61468 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors
IEC 61472 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
IEC 61477 Live working - Minimum requirements for the utilization of tools, devices and equipment
IEC 61478 Live working - Ladders of insulating material
IEC 61479 Live working - Flexible conductor covers (line hoses) of insulating material
IEC 61481 Live working - Phase comparators
IEC 61482 Live working - Protective clothing against the thermal hazards of an electric arc
IEC 61496 Safety of machinery - Electro-sensitive protective equipment
IEC 61497 Nuclear power plants - Electrical interlocks for functions important to safety - Recommendations for design and implementation
IEC 61499 Function blocks
IEC 61500 Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions
IEC 61501 Nuclear reactor instrumentation - Wide range neutron flounce rate meter - Mean square voltage method
IEC 61502 Nuclear power plants - Pressurized water reactors - Vibration monitoring of internal structures
IEC 61504 Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring
IEC 61506 Industrial-process measurement and control - Documentation of application software
IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
IEC 61511 Functional safety – safety instrumented systems for the process industry sector
IEC 61512 Batch control
IEC 61513 Functional safety – safety instrumented systems for the Nuclear Industries
IEC 61514 Industrial process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
IEC 61515 Mineral insulated thermocouple cables and thermocouples
IEC 61518 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
IEC 61520 Metal thermo wells for thermometer sensors - Functional dimensions
IEC 61523 Delay and Power Calculation Standards
IEC 61526 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
IEC 61534 Power track systems
IEC 61535 Installation couplers intended for permanent connection in fixed installations
IEC 61537 Cable management – Cable tray systems and cable ladder systems
IEC 61540 Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
IEC 61543 Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
IEC 61545 Connecting devices - Devices for the connection of aluminum conductors in clamping units of any material and copper conductors in aluminum bodied clamping units
IEC 61547 Equipment for general lighting purposes - EMC immunity requirements
IEC 61549 Miscellaneous lamps
IEC 61554 Panel-Mounted equipment - Electrical measuring instruments - Dimensions for panel mounting
IEC 61557 Equipment for measuring electrical safety in low-voltage distribution systems
IEC 61558 Safety of power transformers, power supplies, reactors and similar products
IEC 61559 Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity
IEC 61560 Radiation protection instrumentation - Apparatus for non-destructive radiation tests of fur and other cloth samples
IEC 61562 Radiation protection instrumentation - Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
IEC 61563 Radiation protection instrumentation - Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs
IEC 61566 Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz
IEC 61577 Radiation protection instrumentation - Radon and radon decay product measuring instruments
IEC 61578 Radiation protection instrumentation - Calibration and verification of the effectiveness of radon compensation for alpha and/or beta aerosol measuring instruments - Test methods
IEC 61580 Measurement of return loss on waveguide and waveguide assemblies
IEC 61582 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
IEC 61584 Radiation protection instrumentation - Installed, portable or transportable assemblies - Measurement of air kerma direction and air kerma rate
IEC TS 61586 Estimation of the reliability of electrical connectors
IEC 61587 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series
IEC 61588 Precision clock synchronization protocol for networked measurement and control systems
IEC 61591 Household range hoods - Methods for measuring performance
IEC TR 61592 Household electrical appliances - Guidelines for consumer panel testing
IEC 61595 Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use
IEC TR 61597 Overhead electrical conductors - Calculation methods for stranded bare conductors
IEC 61599 Videodisk players - Methods of measurementt
IEC TR 61602 Connectors used in the field of audio, video and audiovisual engineering
IEC 61603 Infrared transmission of audio or video signals
IEC TR 61604 Dimensions of uncoated ring cores of magnetic oxides
IEC 61605 Fixed inductors for use in electronic and telecommunication equipment - Marking codes
IEC 61606 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics
IEC 61609 Microwave ferrite components - Guide for the drafting of specifications
IEC 61610 Prints and transparencies produced from electronic sources - Assessment of image quality
IEC 61619 Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
IEC 61620 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
IEC 61621 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
IEC 61628 Corrugated pressboard and press paper for electrical purposes
IEC 61629 Aramid pressboard for electrical purposes
IEC 61631 Test method for the mechanical strength of cores made of magnetic oxides
IEC TR 61641 Enclosed low-voltage switchgear and control gear assemblies - Guide for testing under conditions of arcing due to internal fault
IEC 61642 Industrial a.c. Networks Affected by Harmonics – Application of Filters and Shunt Capacitors
IEC 61643 Surge protective devices connected to low-voltage power distribution systems
IEC 61646 Thin-film terrestrial photovoltaic (PV) modules – Design qualification and type approval
IEC 61649 Weibull analysis
IEC 61650 Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities
IEC 61660 Short-circuit currents in d.c. auxiliary installations in power plants and substations
IEC 61666 Industrial systems, installations and equipment and industrial products – Identification of terminals within a system
IEC 61669 Electroacoustic - Measurement of real-ear acoustical performance characteristics of hearing aids
IEC 61671 Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML
IEC 61672 Electroacoustic – Sound level meters
IEC 61674 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
IEC 61675 Radionuclide imaging devices - Characteristics and test conditions
IEC 61676 Medical electrical equipment - Diametric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
IEC 61683 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
IEC 61685 Ultrasonic - Flow measurement systems - Flow test object
IEC 61689 Ultrasonic - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
IEC 61690 Electronic design interchange format (EDIF)
IEC 61691 Behavioral languages
IEC 61701 Salt mist corrosion testing of photovoltaic (PV) modules
IEC 61703 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
IEC 61709 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion
IEC 61710 Power law model - Goodness-of-fit tests and estimation methods
IEC 61724 Photovoltaic system performance monitoring – Guidelines for measurement
IEC 61725 Analytical expression for daily solar profiles
IEC 61726 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
IEC 61727 Photovoltaic (PV) systems – Characteristics of the utility interface
IEC 61730 Photovoltaic modules
IEC/TR 61734 Application of symbols for binary logic and analogue elements
IEC 61739 Integrated circuits
IEC 61744 Calibration of fiber optic chromatic dispersion test sets
IEC 61745 End-face image analysis procedure for the calibration of optical fiber geometry test sets
IEC 61746 Calibration of optical time-domain reflect meters (OTDR)
IEC 61747 Liquid crystal display devices
IEC 61753 Fiber optic interconnecting devices and passive components performance standard
IEC 61754 Fiber optic interconnecting devices and passive components - Fibre optic connector interfaces
IEC 61755 Fiber optic connector optical interfaces
IEC 61756 Fiber optic interconnecting devices and passive components - Interface standard for fibre management systems
IEC 61757 Fiber optic sensors
IEC 61758 Fiber optic interconnecting devices and passive components - Interface standard for closures
IEC 61760 Surface mounting technology
IEC 61770 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
IEC 61771 Nuclear power plants - Main control-room - Verification and validation of design
IEC 61772 Nuclear power plants - Control rooms - Application of visual display units (VDUs)
IEC 61773 Overhead lines - Testing of foundations for structures
IEC TS 61774 Overhead lines - Meteorological data for assessing climatic loads
IEC 61784 Industrial communication networks – Profiles
IEC 61786 Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings
IEC 61788 Superconductivity
IEC 61797 Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers
IEC 61800 Adjustable speed electrical power drive systems
IEC 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations
IEC TS 61804 Function blocks (FB) for process control
IEC TR 61807 Magnetic properties of magnetically hard materials at elevated temperatures - Methods of measurement
IEC 61810 Electromechanical elementary relays
IEC 61811 Electromechanical telecom elementary relays of assessed quality
IEC 61812 Time relays for industrial and residential use
IEC TS 61813 Live working - Care, maintenance and in-service testing of aerial devices with insulating booms
IEC 61817 Household portable appliances for cooking, grilling and similar use - Methods of measuring performance Household portable appliances for cooking, grilling and similar use - Methods for measuring performance
IEC 61821 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits
IEC 61822 Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
IEC 61823 Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
IEC TS 61827 Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports
IEC 61828 Ultrasonic - Focusing transducers - Definitions and measurement methods for the transmitted fields
IEC 61829 Crystalline silicon photovoltaic (PV) array – On-site measurement of I-V characteristics
IEC TR 61831 On-line analyzer systems - Guide to design and installation
IEC TR 61832 Design and installation of on-line analyzer systems - Guide to technical enquiry and bid evaluation
IEC 61834 Recording - Helical-scan digital video cassette recording system using 6.35 mm magnetic tape for consumer use (525-60, 625-50, 1125–60 and 1250-50 systems)
IEC 61835 Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-5
IEC TS 61836 Solar photovoltaic energy systems - Terms, definitions and symbols
IEC 61837 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections
IEC TR 61838 Nuclear power plants - Instrumentation and control important to safety - Use of probabilistic safety assessment for the classification of functions
IEC 61839 Nuclear power plants - Design of control rooms - Functional analysis and assignment
IEC 61842 Microphones and earphones for speech communications
IEC 61843 Measuring method for the level of intermodulation products generated in a gyromagnetic device
IEC 61846 Ultrasonic – Pressure pulse lithotripters – Characteristics of fields
IEC 61847 Ultrasonic - Surgical systems - Measurement and declaration of the basic output characteristics
IEC 61850 Communication Networks and Systems for Power Utility Automation
IEC 61851 Electric vehicle conductive charging system
IEC TR 61852 Medical electrical equipment - Digital imaging and communications in medicine (DICOM) - Radiotherapy objects
IEC 61853 Photovoltaic (PV) module performance testing and energy rating
IEC 61854 Overhead lines - Requirements and tests for spacers
IEC 61855 Household electrical hair care appliances - Methods of measuring the performance
IEC 61857 Electrical insulation systems
IEC 61858 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS)
IEC TR 61859 Guidelines for radiotherapy treatment rooms design
IEC 61865 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
IEC 61866 Audiovisual systems - Interactive text transmission system (ITTS)
IEC 61868 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
IEC 61869 Instrument transformers
IEC 61874:1998 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
IEC 61880 Video systems (525/60) - Video and accompanied data using the vertical blanking interval - Analogue interface
IEC 61881 Railway applications - Rolling stock equipment - Capacitors for power electronics
IEC 61882 Hazard and operability studies (HAZOP studies) - Application guide
IEC 61883 Consumer audio/video equipment - Digital interface
IEC 61888 Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip set points
IEC 61892 Mobile and fixed offshore units – Electrical installations
IEC TS 61895 Ultrasonic - Pulsed Doppler diagnostic systems - Test procedures to determine performance
IEC 61897 Overhead lines - Requirements and tests for Stockbridge type Aeolian vibration dampers
IEC TR 61901 Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV)
IEC 61904 Video recording - Helical-scan digital component video cassette recording format using 12.65 mm magnetic tape and incorporating data compression (Format digital-L)
IEC 61907 Communication network dependability engineering
IEC TR 61908 The technology roadmap for industry data dictionary structure, utilization and implementation
IEC 61909 Audio recording - Minidisc system
IEC 61910 Medical electrical equipment - Radiation dose documentation
IEC TR 61911 Live working - Guidelines for installation of distribution line conductors - Stringing equipment and accessory items
IEC TR 61912 Low-voltage switchgear and control gear - Overcurrent protective devices
IEC 61914 Cable cleats for electrical installations
IEC 61915 Low-voltage switchgear and controlgear - Device profiles for networked industrial devices
IEC TR 61916 Electrical accessories - Harmonization of general rules
IEC 61918 Industrial communication networks - Installation of communication networks in industrial premises
IEC 61920 Infrared free air applications
IEC 61921 Power capacitors - Low-voltage power factor correction banks
IEC 61922 High-frequency induction heating installations – Test methods for the determination of power output of the generator
IEC TR 61923 Household electrical appliances - Method of measuring performance - Assessment of repeatability and reproducibility
IEC 61924 Maritime navigation and radio communication equipment and systems - Integrated navigation systems
IEC 61925 Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server
IEC 61926 Design automation
IEC TR 61930 Fiber optic graphical symbology
IEC TR 61931 Fiber optic - Terminology
IEC TS 61934 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
IEC 61935 Specification for the testing of balanced and coaxial information technology cabling
IEC 61936 Power installations exceeding 1 kV a.c.
IEC 61937 Digital audio - Interface for non-linear PCM encoded audio bit streams applying IEC 60958
IEC 61938 Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability
IEC 61943 Integrated circuits - Manufacturing line approval application guideline
IEC TS 61944 Integrated circuits - Manufacturing line approval - Demonstration vehicles
IEC TS 61945 Integrated circuits - Manufacturing line approval - Methodology for technology and failure analysis
IEC TR 61946 Mineral insulating oils - Characterization of paraffinic/naphthenic nature - Low temperature differential scanning calorimetric (DSC) test method
IEC 61947 Electronic projection - Measurement and documentation of key performance criteria
IEC TR 61948 Nuclear medicine instrumentation - Routine tests
IEC TS 61949 Ultrasonic - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams
IEC 61950 Cable management systems - Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit
IEC 61951 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells
IEC 61952 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
IEC 61954 Static var compensators (SVC) - Testing of thyristor valves
IEC TS 61956 Methods of test for the evaluation of water treeing in insulating materials
IEC 61959 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries
IEC 61960 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
IEC 61964 Integrated circuits - Memory devices pin configurations
IEC 61965 Mechanical safety of cathode ray tubes
IEC 61966 Multimedia systems -- Color measurement
IEC 61967 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz
IEC 61968 Application integration at electric utilities – System interfaces for distribution management
IEC 61969 Mechanical structures for electronic equipment - Outdoor enclosures
IEC 61970 Application integration at electric utilities – Energy management system application program interface (EMS-API)
IEC TS 61973 High voltage direct current (HVDC) substation audible noise
IEC 61975 High-voltage direct current (HVDC) installations - System tests
IEC 61976 Nuclear instrumentation - Spectrometry - Characterization of the spectrum background in HPGe gamma-ray spectrometry
IEC 61977 Fiber optic interconnecting devices and passive components - Fiber optic filters - Generic specification
IEC 61978 Fiber optic interconnecting devices and passive components - Fiber optic passive chromatic dispersion compensators
IEC 61980 Electric vehicle wireless power transfer (WPT) systems
IEC 61982 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests
IEC 61984 Connectors - Safety requirements and tests
IEC 61987 Industrial-process measurement and control - Data structures and elements in process equipment catalogues
IEC 61988 Plasma display panels
IEC 61991 Railway applications - Rolling stock - Protective provisions against electrical hazards
IEC 61992 Railway applications - Fixed installations - DC switchgear
IEC 61993 Maritime navigation and radio communication equipment and systems
IEC TS 61994 Piezoelectric and dielectric devices for frequency control and selection - Glossary
IEC 61995 Devices for the connection of luminaires for household and similar purposes
IEC 61996 Maritime navigation and radio communication equipment and systems - Ship borne voyage data recorder (VDR)
IEC TR 61997 Guidelines for the user interface in multimedia equipment for general purpose use
IEC TR 61998 Model and framework for standardization in multimedia equipment and systems
IEC TR 62000 Guidance for combining different single-mode fibres types
IEC TR 62001 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters
IEC 62002 Mobile and portable DVB-T/H radio access
IEC 62003 Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing
IEC 62004 Thermal-resistant aluminum alloy wire for overhead line conductor
IEC 62005 Reliability of fiber optic interconnecting devices and passive components
IEC 62006 Hydraulic machines - Acceptance tests of small hydroelectric installations
IEC 62007 Semiconductor optoelectronic devices for fiber optic system applications
IEC 62008 Performance characteristics and calibration methods for digital data acquisition systems and relevant software
IEC TR 62010 Analyzer systems - Guidance for maintenance management
IEC 62011 Insulating materials - Industrial, rigid, molded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes
IEC 62012 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments
IEC 62014 Electronic design automation libraries
IEC 62014-4 IP-XACT - Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows
IEC 62014-5 Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs
IEC 62023 Structuring of technical information and documentation
IEC 62027 Preparation of object lists, including parts lists
IEC 62031 LED modules for general lighting – Safety specifications
IEC 62035 Discharge lamps (excluding fluorescent lamps) – Safety specifications
IEC 62040 Uninterruptible power systems
IEC 62041 EMC requirements for power transformers, power supplies, reactors and similar products
IEC TS 62046 Safety of machinery - Application of protective equipment to detect the presence of persons
IEC 62052 Electricity metering equipment (AC) General requirements, tests and test conditions
IEC 62056 DLM/COSEM communication protocol for reading utility meters
IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
IEC 62068 Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses
IEC 62076 Industrial electro heating installations – Test methods for induction channel and induction crucible furnaces
IEC 62087 Methods of measurement for the power consumption of audio, video and related equipment
IEC 62097 Hydraulic machines, radial and axial - Performance conversion method from model to prototype
IEC TS 62100 Cables for aeronautical ground lighting primary circuits
IEC 62107 Super Video Compact Disc
IEC 62108 Concentrator photovoltaic (CPV) modules and assemblies – Design qualification and type approval
IEC 62121 Methods of measurement for minidisc recorders/players
IEC 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
IEC 62138 Nuclear Power Plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions
IEC/TR 62157 Cylindrical machined carbon electrodes – Nominal dimensions
IEC 62196 Plugs and sockets for charging electric vehicles
IEC 62208 Empty enclosures for low-voltage switchgear and control gear assemblies - General requirements
IEC 62209 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures
IEC 62246 Reed switches
IEC 62256 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 62264 Enterprise-control system integration
IEC 62265 Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and blocks
IEC 62270 Hydroelectric power plant automation – Guide for computer-based control
IEC 62271 High-voltage switchgear and control gear
IEC 62278 Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
IEC 62282 Fuel cell technologies
IEC 62301 Household electrical appliances – Measurement of standby power
IEC 62304 Medical Device Software – Software Life Cycle Processes
IEC 62305 Protection against Lightning
IEC 62325 Standards related to energy market models & communications
IEC TR 62331 Pulsed field magnetometry
IEC 62351 Power System Control and Associated Communications – Data and Communication Security
IEC 62353 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
IEC/TR 62357 Power system control and associated communications - Reference architecture for object models, services and protocols
IEC 62365 Digital audio – Digital input-output interfacing – Transmission of digital audio over asynchronous transfer mode (ATM) networks
IEC 62366 Medical devices – Application of usability engineering to medical devices
IEC 62368 Audio/video, information and communication technology equipment
IEC 62379 Common control interface for networked digital audio and video products
IEC 62384 DC or AC supplied electronic control gear for LED modules – Performance requirements
IEC 62386 Digital addressable lighting interface
IEC 62388 Maritime Navigation and Radio Communications, Ship borne Radar
IEC 62395 Electrical resistance trace heating systems for industrial and commercial applications
IEC 62420 Concentric lay stranded overhead electrical conductors containing one or more gap(s)
IEC 62439 Industrial communication networks - High availability automation networks
IEC 62443 Industrial communication networks – Network and system security (DRAFT)
IEC 62446 Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection
IEC 62455 Internet protocol (IP) and transport stream (TS) based service access
IEC 62464 Magnetic resonance equipment for medical imaging
IEC 62471 Photo biological safety of lamps and lamp systems
IEC 62474 Material declaration for products of and for the electro technical industry
IEC 62481 Digital Living Network Alliance (DLNA) home networked device interoperability guidelines
IEC 62491 Industrial systems, installations and equipment and industrial products - Labelling of cables and cores
IEC 62493 Assessment of lighting equipment related to human exposure to electromagnetic fields
IEC 62502 Analysis techniques for dependability – Event tree analysis (ETA)
IEC 62504 General lighting – Light emitting diode (LED) products and related equipment – Terms and definitions
IEC 62505 Railway applications – Fixed installations – Particular requirements for a.c. switchgear
IEC 62507 Identification systems enabling unambiguous information interchange - Requirements
IEC 62531 Property Specification Language (PSL)
IEC TS 62556 Ultrasonic - Field characterization - Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
IEC 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety specifications
IEC 62561 Lightning protection system components (LPSC)
IEC 62606 General requirements for arc fault detection devices
IEC 62612 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements
IEC 62680 Universal Serial Bus (USB) interfaces for data and power
IEC 62682 Management of alarm systems for the process industries
IEC 62684 Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
IEC/TR 62685 Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
IEC 62693 Industrial electro heating installations – Test methods for infrared electro heating installations
IEC 62700 DC Power supply for notebook computer
IEC 62703 Expression of performance of fluorometric oxygen analyzers in liquid media
IEC 62708 Documents kinds for electrical and instrumentation projects in the process industry
IEC 62717 LED modules for general lighting – Performance requirements
IEC 62734 Industrial networks - Wireless communication network and communication profiles - ISA 100.11a
IEC 62769 Field device integration (FDI)
IEC 62776 Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications
IEC/TR 62794 Industrial-process measurement, control and automation - Reference model for representation of production facilities (digital factory)
IEC/TR 62795 Interoperation guide of field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL)
IEC/TS 62796 Energy efficiency in electro heating installations
IEC 62798 Industrial electro heating equipment – Test methods for infrared emitters
IEC/TR 62837 Energy efficiency through automation systems
IEC 62885 Dry vacuum cleaners for household or similar use - Methods for measuring the performance
IEC/TS 62872 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
IEC/TR 62914 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Experimental procedure for the forced internal short-circuit test of IEC 62133:2012
IEC/PAS 62948 Industrial networks - Wireless communication network and communication profiles - WIA-FA
IEC/PAS 62953 Industrial communication networks - Fieldbus specifications - ADS-net
IEC 80001 Application of risk management for IT-networks incorporating medical devices
IEC 81346 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations


BS- British Standard list are as below:
BS 0 A standard for standards specifies Development, Structure and Drafting of British Standards themselves.
BS 1 Lists of Rolled Sections for Structural Purposes
BS 2 Specification and Sections of Tramway Rails and Fishplates
BS 3 Report on Influence of Gauge Length and Section of Test Bar on the Percentage of Elongation
BS 4 Specification for Structural Steel Sections
BS 5 Report on Locomotives for Indian Railways
BS 6 Properties of Rolled Sections for Structural Purposes
BS 7 Dimensions of Copper Conductors Insulated Annealed, for Electric Power and Light
BS 8 Specification for Tubular Tramway Poles
BS 9 Specification and Sections of Bull Head Railway Rails
BS 10 Tables of Pipe Flanges
BS 11 Specifications and Sections of Flat Bottom Railway Rails
BS 12 Specification for Portland cement
BS 13 Specification for Structural Steel for Shipbuilding
BS 14 Specification for Structural Steel for Marine Boilers
BS 15 Specification for Structural Steel for Bridges, etc., and General Building Construction
BS 16 Specification for telegraph material (insulators, pole fittings, etc.)
BS 17 Interim Report on Electrical Machinery
BS 18 Forms of Tensile Test Pieces
BS 19 Report on Temperature Experiments on Field Coils of Electrical Machines
BS 20 Report on *BS Screw Threads
BS 21 Report on Pipe Threads for Iron or Steel Pipes and Tubes
BS 22 Report on Effect of Temperature on Insulating Materials
BS 23 Standards for Trolley Groove and Wire,
BS 24 Specifications for Material used in the Construction of Standards for Railway Rolling Stock
BS 25 Report on Errors in Workmanship Based on Measurements Carried Out for the Committee by the National Physical Laboratory
BS 26 Second Report on Locomotives for Indian Railways (Superseding No 5)
BS 27 Report on Standard Systems of Limit Gauges for Running Fits
BS 28 Report on Nuts, Bolt Heads and Spanners
BS 29 Specification for Ingot Steel Forgings for Marine Purposes,
BS 30 Specification for Steel Castings for Marine Purposes,
BS 31 Specification for Steel Conduits for Electrical Wiring
BS 32 Specification for Steel Bars for use in Automatic Machines
BS 33 Carbon Filament Electric Lamps
BS 34 Tables of BS Whitworth, BS Fine and BS Pipe Threads
BS 35 Specification for Copper Alloy Bars for use in Automatic Machines
BS 36 Report on British Standards for Electrical Machinery
BS 37 Specification for Electricity Meters
BS 38 Report on British Standards Systems for Limit Gauges for Screw Threads
BS 39 Combined Report on BS Screw Threads
BS 40 Specification for Spigot and Socket Cast Iron Low Pressure Heating Pipes
BS 41 Specification for Spigot and Socket Cast Iron Flue or Smoke Pipes
BS 42 Report on Reciprocating Steam Engines for Electrical Purposes
BS 43 Specification for Charcoal Iron Lip-welded Boiler Tubes
BS 44 Specification for Cast Iron Pipes for Hydraulic Power
BS 45 Report on Dimensions for Sparking Plugs (for Internal Combustion Engines)
BS 46 Specification for Keys and Keyways
BS 47 Steel Fishplates for Bullhead and Flat Bottom Railway Rails, Specification and Sections of
BS 48 Specification for Wrought Iron of Smiting Quality for Shipbuilding (Grade D)
BS 49 Specification for Ammeters and Voltmeters
BS 50 Third Report on Locomotives for Indian Railways (Superseding Nos. 5 and 26)
BS 51 Specification for Wrought Iron for use in Railway Rolling Stock (‘Best Yorkshire’ and Grades A, B and C)
BS 52 Specification for bayonet lamp-caps lamp holders and B.C. adaptors (lamp holder plugs)
BS 53 Specification for Cold Drawn Weldless Steel Boiler Tubes for Locomotive Boilers
BS 54 Report on Screw Threads, Nuts and Bolt Heads for use in Automobile Construction
BS 55 Report on Hard Drawn Copper and Bronze Wire
BS 56 Definitions of Yield Point and Elastic Limit
BS 57 Report on heads for Small Screws
BS 58 Specification for Spigot and socket Cast Iron Soil Pipes
BS 59 Specification for Spigot and Socket Cast Iron Waste and Ventilating Pipes (for other than Soil Purposes)
BS 60 Report of Experiments on Tungsten Filament Glow Lamps
BS 61 Specification for Copper Tubes and their Screw Threads (primarily for domestic and similar work)
BS 62 Screwing for Marine Boiler Stays,
BS 63 Specification for Sizes of Broken Stone and Chippings,
BS 64 Specification for Fish bolts and Nuts for Railway Rails
BS 65 Specification for Salt-Glazed Ware Pipes,
BS 66 Specification for Copper-Alloy Three-Piece Unions (for Low and Medium Pressure Screwed Copper Tubes)
BS 67 Specification for Two and Three-Plate Ceiling Roses
BS 68 Method of Specifying the Resistance of Steel Conductor Rails,
BS 69 Report on Tungsten Filament Glow Lamps (Vacuum Type) for Automobiles
BS 70 Report on Pneumatic Tyre Rims for Automobiles, Motor Cycles and Cycles
BS 71 Report on Dimensions of Wheel Rims and Tyre Bands for Solid Rubber Tyres for Automobiles
BS 72 British Standardization Rules for Electrical Machinery,
BS 73 Specification for Two-Pin Wall Plugs and Sockets (Five-, Fifteen- and Thirty-Ampere)
BS 74 Charging Plug and Socket, for Vehicles Propelled by Electric Secondary Batteries, Specification for
BS 75 Steels for Automobiles, Specification for Wrought
BS 76 Report of and Specifications for Tar and Pitch for Road Purposes
BS 77 Specification. Voltages for a.c. transmission and distribution systems
BS 78 Specification for Cast Iron Pipes and Special Castings for Water, Gas and Sewage
BS 79 Report on Dimensions of Special Track work for Tramways
BS 80 Magnetos for Automobile Purposes
BS 81 Specification for Instrument Transformers
BS 82 Specification for Starters for Electric Motors
BS 83 Standard of Reference for Dope and Protective Covering for Aircraft
BS 84 Report on Screw Threads (British Standard Fine), and their Tolerances (Superseding parts of Reports Nos. 20 and 33)
BS 86 Report on Dimensions of Magnetos for Aircraft Purposes
BS 87 Report on Dimensions for Airscrew Hubs
BS 88 Specification for cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Originally titled: “Specification for Electric Cut-Outs (Low Pressure, Type O)”
BS 89 Specification for Indicating Ammeters, Voltmeters, Watt meters, Frequency and Power-Factor Meters
BS 90 Specification for Recording (Graphic) Ammeters, Voltmeters and Watt meters
BS 95 Tables of Corrections to Effective Diameter required to compensate Pitch and Angle Errors in Screw Threads of Whitworth Form
BS 98 Specification for Goliath Lamp Caps and Lamp Holders
BS 103 Specification for Falling Weight Testing Machines for Rails
BS 104 Sections of Light Flat Bottom Railway Rails and Fishplates
BS 105 Sections of Light and Heavy Bridge Type Railway Rails
BS 107 Standard for Rolled Sections for Magnet Steel
BS 196 for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts
BS 308 a now deleted standard for engineering drawing conventions, having been absorbed into BS 8888.
BS 317 for Hand-Shield and Side Entry Pattern Three-Pin Wall Plugs and Sockets (Two Pin and Earth Type)
BS 336 for fire hose couplings and ancillary equipment
BS 372 for Side-entry wall plugs and sockets for domestic purposes (Part 1 superseded BS 73 and Part 2 superseded BS 317)
BS 381 for colors used in identification, coding and other special purposes
BS 476 for fire resistance of building materials / elements
BS 499 Welding terms and symbols.
BS 546 for Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors for AC (50–60 Hz) circuits up to 250V
BS 857 for safety glass for land transport
BS 987C Camouflage Colors
BS 1088 for marine plywood
BS 1192 for Construction Drawing Practice. Part 5 (BS1192-5:1998) concerns Guide for structuring and exchange of CAD data.
BS 1361 for cartridge fuses for a.c. circuits in domestic and similar premises
BS 1362 for cartridge fuses for BS 1363 power plugs
BS 1363 for mains power plugs and sockets
BS 1377 Methods of test for soils for civil engineering.
BS 1572 Colors for Flat Finishes for Wall Decoration
BS 1881 Testing Concrete
BS 1852 Specification for marking codes for resistors and capacitors
BS 2660 Colors for building and decorative paints
BS 2979 Transliteration of Cyrillic and Greek Letters
BS 3506 for plasticized PVC pipe for industrial uses
BS 3621 Thief resistant lock assembly. Key egress.
BS 3943 Specification for plastics waste traps
BS 4142 Methods for rating and assessing industrial and commercial sound
BS 4293 for residual current-operated circuit-breakers
BS 4343 for industrial electrical power connectors
BS 4573 Specification for 2-pin reversible plugs and shaver socket-outlets
BS 4800 for paint colors used in building construction
BS 4900 for vitreous enamel colors used in building construction
BS 4901 for plastic colors used in building construction
BS 4902 for sheet / tile floor covering colors used in building construction
BS 4960 for weighing instruments for domestic cookery
BS 4962 for plastics pipes and fittings for use as subsoil field drains
BS 5252 for color-coordination in building construction
BS 5400 for steel, concrete and composite bridges.
BS 5499 for graphical symbols and signs in building construction; including shape, color and layout
BS 5544 for anti-bandit glazing (glazing resistant to manual attack)
BS 5750 for quality management, the ancestor of ISO 9000
BS 5759 Specification for webbing load restraint assemblies for use in surface transport
BS 5837 for protection of trees during construction work
BS 5839 for fire detection and alarm systems for buildings
BS 5930 for site investigations
BS 5950 for structural steel
BS 5993 for Cricket balls
BS 6008 for preparation of a liquor of tea for use in sensory tests
BS 6312 for telephone plugs and sockets
BS 6651 code of practice for protection of structures against lightning; replaced by BS EN 62305 (IEC 62305) series.
BS 6701 installation, operation and maintenance of telecommunications equipment and telecommunications cabling
BS 6879 for British geocodes, a superset of ISO 3166-2:GB
BS 7430 code of practice for earthing
BS 7671 Requirements for Electrical Installations, The IEE Wiring Regulations, produced by the IET.
BS 7799 for information security, the ancestor of the ISO/IEC 27000 family of standards, including 27002 (formerly 17799)
BS 7901 for recovery vehicles and vehicle recovery equipment
BS 7909 Code of practice for temporary electrical systems for entertainment and related purposes
BS 7919 Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
BS 7910 guide to methods for assessing the acceptability of flaws in metallic structures
BS 7925 Software testing
BS 7971 Protective clothing and equipment for use in violent situations and in training
BS 8110 for structural concrete
BS 8233 Guidance on sound insulation and noise reduction in buildings
BS 8484 for the provision of lone worker device services
BS 8485 for the characterization and remediation from ground gas in affected developments
BS 8494 for detecting and measuring carbon dioxide in ambient air or extraction systems
BS 8888 for engineering drawing and technical product specification
BS 15000 for IT Service Management, (ITIL), now ISO/IEC 20000
BS 3G 101 for general requirements for mechanical and electromechanical aircraft indicators
BS EN 12195 Load restraining on road vehicles.
BS EN 60204 Safety of machinery

NFPA Standards

A series of NFPA standards are here for your reference:
NFPA 1  Fire Code
NFPA 2  Hydrogen Technologies Code
NFPA 3  Recommended Practice for Commissioning of Fire Protection and Life Safety Systems
NFPA 4  Standard for Integrated Fire Protection and Life Safety System Testing
NFPA 10               Standard for Portable Fire Extinguishers
NFPA 11               Standard for Low-, Medium-, and High-Expansion Foam
NFPA 11A            Standard for Medium- and High-Expansion Foam Systems
NFPA 11C            Standard for Mobile Foam Apparatus
NFPA 12               Standard on Carbon Dioxide Extinguishing Systems
NFPA 12A            Standard on Halon 1301 Fire Extinguishing Systems
NFPA 13               Standard for the Installation of Sprinkler Systems
NFPA 13D            Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
NFPA 13E             Recommended Practice for Fire Department Operations in Properties Protected by Sprinkler and Standpipe Systems
NFPA 13R            Standard for the Installation of Sprinkler Systems in Low-Rise Residential Occupancies
NFPA 14               Standard for the Installation of Standpipe and Hose Systems
NFPA 15               Standard for Water Spray Fixed Systems for Fire Protection
NFPA 16               Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems
NFPA 17               Standard for Dry Chemical Extinguishing Systems
NFPA 17A            Standard for Wet Chemical Extinguishing Systems
NFPA 18               Standard on Wetting Agents
NFPA 18A            Standard on Water Additives for Fire Control and Vapor Mitigation
NFPA 20               Standard for the Installation of Stationary Pumps for Fire Protection
NFPA 22               Standard for Water Tanks for Private Fire Protection
NFPA 24               Standard for the Installation of Private Fire Service Mains and Their Appurtenances
NFPA 25               Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems
NFPA 30               Flammable and Combustible Liquids Code
NFPA 30A            Code for Motor Fuel Dispensing Facilities and Repair Garages
NFPA 30B            Code for the Manufacture and Storage of Aerosol Products
NFPA 31               Standard for the Installation of Oil-Burning Equipment
NFPA 32               Standard for Dry-cleaning Facilities
NFPA 33               Standard for Spray Application Using Flammable or Combustible Materials
NFPA 34               Standard for Dipping, Coating, and Printing Processes Using Flammable or Combustible Liquids
NFPA 35               Standard for the Manufacture of Organic Coatings
NFPA 36               Standard for Solvent Extraction Plants
NFPA 37               Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
NFPA 40               Standard for the Storage and Handling of Cellulose Nitrate Film
NFPA 42               Code for the Storage of Pyroxylin Plastic
NFPA 45               Standard on Fire Protection for Laboratories Using Chemicals
NFPA 46               Recommended Safe Practice for Storage of Forest Products
NFPA 50               Standard for Bulk Oxygen Systems at Consumer Sites
NFPA 50A            Standard for Gaseous Hydrogen Systems at Consumer Sites
NFPA 50B            Standard for Liquefied Hydrogen Systems at Consumer Sites
NFPA 51               Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes
NFPA 51A            Standard for Acetylene Cylinder Charging Plants
NFPA 51B            Standard for Fire Prevention during Welding, Cutting, and Other Hot Work
NFPA 52               Vehicular Natural Gas Fuel Systems Code
NFPA 53               Recommended Practice on Materials, Equipment, and Systems Used in Oxygen-Enriched Atmospheres
NFPA 54               National Fuel Gas Code
NFPA 55               Compressed Gases and Cryogenic Fluids Code
NFPA 56               Standard for Fire and Explosion Prevention during Cleaning and Purging of Flammable Gas Piping Systems
NFPA 57               Liquefied Natural Gas (LNG) Vehicular Fuel Systems Code
NFPA 58               Liquefied Petroleum Gas Code
NFPA 59               Utility LP-Gas Plant Code
NFPA 59A            Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)
NFPA 61               Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities
NFPA 67               Guide on Explosion Protection for Gaseous Mixtures in Pipe Systems
NFPA 68               Standard on Explosion Protection by Deflagration Venting
NFPA 69               Standard on Explosion Prevention Systems
NFPA 70               National Electrical Code®
NFPA 70A            National Electrical Code® Requirements for One- and Two-Family Dwellings
NFPA 70B            Recommended Practice for Electrical Equipment Maintenance
NFPA 70E             Standard for Electrical Safety in the Workplace®
NFPA 72               National Fire Alarm and Signaling Code
NFPA 73               Standard for Electrical Inspections for Existing Dwellings
NFPA 75               Standard for the Fire Protection of Information Technology Equipment
NFPA 76               Standard for the Fire Protection of Telecommunications Facilities
NFPA 77               Recommended Practice on Static Electricity
NFPA 79               Electrical Standard for Industrial Machinery
NFPA 80               Standard for Fire Doors and Other Opening Protective
NFPA 80A            Recommended Practice for Protection of Buildings from Exterior Fire Exposures
NFPA 82               Standard on Incinerators and Waste and Linen Handling Systems and Equipment
NFPA 85               Boiler and Combustion Systems Hazards Code
NFPA 86               Standard for Ovens and Furnaces
NFPA 86C            Standard for Industrial Furnaces Using a Special Processing Atmosphere
NFPA 86D            Standard for Industrial Furnaces Using Vacuum as an Atmosphere
NFPA 87               Recommended Practice for Fluid Heaters
NFPA 88A            Standard for Parking Structures
NFPA 88B            Standard for Repair Garages
NFPA 90A            Standard for the Installation of Air-Conditioning and Ventilating Systems
NFPA 90B            Standard for the Installation of Warm Air Heating and Air-Conditioning Systems
NFPA 91               Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Particulate Solids
NFPA 92               Standard for Smoke Control Systems
NFPA 92A            Standard for Smoke-Control Systems Utilizing Barriers and Pressure Differences
NFPA 92B            Standard for Smoke Management Systems in Malls, Atria, and Large Spaces
NFPA 96               Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations
NFPA 97               Standard Glossary of Terms Relating to Chimneys, Vents, and Heat-Producing Appliances
NFPA 99               Health Care Facilities Code
NFPA 99B            Standard for Hypobaric Facilities
NFPA 101             Life Safety Code®
NFPA 101A          Guide on Alternative Approaches to Life Safety
NFPA 101B          Code for Means of Egress for Buildings and Structures
NFPA 102             Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures
NFPA 105             Standard for Smoke Door Assemblies and Other Opening Protective
NFPA 110             Standard for Emergency and Standby Power Systems
NFPA 111             Standard on Stored Electrical Energy Emergency and Standby Power Systems
NFPA 115             Standard for Laser Fire Protection
NFPA 120             Standard for Fire Prevention and Control in Coal Mines
NFPA 121             Standard on Fire Protection for Self-Propelled and Mobile Surface Mining Equipment
NFPA 122             Standard for Fire Prevention and Control in Metal/Nonmetal Mining and Metal Mineral Processing Facilities
NFPA 123             Standard for Fire Prevention and Control in Underground Bituminous Coal Mines
NFPA 130             Standard for Fixed Guide way Transit and Passenger Rail Systems
NFPA 140             Standard on Motion Picture and Television Production Studio Soundstages, Approved Production Facilities, and Production Locations
NFPA 150             Standard on Fire and Life Safety in Animal Housing Facilities
NFPA 160             Standard for the Use of Flame Effects Before an Audience
NFPA 170             Standard for Fire Safety and Emergency Symbols
NFPA 203             Guide on Roof Coverings and Roof Deck Constructions
NFPA 204             Standard for Smoke and Heat Venting
NFPA 211             Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances
NFPA 214             Standard on Water-Cooling Towers
NFPA 220             Standard on Types of Building Construction
NFPA 221             Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls
NFPA 225             Model Manufactured Home Installation Standard
NFPA 230             Standard for the Fire Protection of Storage
NFPA 231             Standard for General Storage
NFPA 231C          Standard for Rack Storage of Materials
NFPA 231D          Standard for Storage of Rubber Tires
NFPA 231E          Recommended Practice for the Storage of Baled Cotton
NFPA 231F           Standard for the Storage of Roll Paper
NFPA 232             Standard for the Protection of Records
NFPA 232A          Guide for Fire Protection for Archives and Records Centers
NFPA 241             Standard for Safeguarding Construction, Alteration, and Demolition Operations
NFPA 251             Standard Methods of Tests of Fire Resistance of Building Construction and Materials
NFPA 252             Standard Methods of Fire Tests of Door Assemblies
NFPA 253             Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source
NFPA 255             Standard Method of Test of Surface Burning Characteristics of Building Materials
NFPA 256             Standard Methods of Fire Tests of Roof Coverings
NFPA 257             Standard on Fire Test for Window and Glass Block Assemblies
NFPA 258             Recommended Practice for Determining Smoke Generation of Solid Materials
NFPA 259             Standard Test Method for Potential Heat of Building Materials
NFPA 260             Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture
NFPA 261             Standard Method of Test for Determining Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes
NFPA 262             Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces
NFPA 265             Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls
NFPA 266             Standard Method of Test for Fire Characteristics of Upholstered Furniture Exposed to Flaming Ignition Source
NFPA 267             Standard Method of Test for Fire Characteristics of Mattresses and Bedding Assemblies Exposed to Flaming Ignition Source
NFPA 268             Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source
NFPA 269             Standard Test Method for Developing Toxic Potency Data for Use in Fire Hazard Modeling
NFPA 270             Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber
NFPA 271             Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
NFPA 272             Standard Method of Test for Heat and Visible Smoke Release Rates for Upholstered Furniture Components or Composites and Mattresses Using an Oxygen Consumption Calorimeter
NFPA 274             Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
NFPA 275             Standard Method of Fire Tests for the Evaluation of Thermal Barriers
NFPA 276             Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components
NFPA 277             Standard Methods of Tests for Evaluating Fire and Ignition Resistance of Upholstered Furniture Using a Flaming Ignition Source
NFPA 285             Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components
NFPA 286             Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
NFPA 287             Standard Test Methods for Measurement of Flammability of Materials in Cleanrooms Using a Fire Propagation Apparatus (FPA)
NFPA 288             Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance-Rated Assemblies
NFPA 289             Standard Method of Fire Test for Individual Fuel Packages
NFPA 290             Standard for Fire Testing of Passive Protection Materials for Use on LP-Gas Containers
NFPA 291             Recommended Practice for Fire Flow Testing and Marking of Hydrants
NFPA 295             Standard for Wildfire Control
NFPA 297             Guide on Principles and Practices for Communications Systems
NFPA 298             Standard on Foam Chemicals for Wild land Fire Control
NFPA 299             Standard for Protection of Life and Property from Wildfire
NFPA 301             Code for Safety to Life from Fire on Merchant Vessels
NFPA 302             Fire Protection Standard for Pleasure and Commercial Motor Craft
NFPA 303             Fire Protection Standard for Marinas and Boatyards
NFPA 306             Standard for the Control of Gas Hazards on Vessels
NFPA 307             Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves
NFPA 312             Standard for Fire Protection of Vessels during Construction, Conversion, Repair, and Lay-Up
NFPA 318             Standard for the Protection of Semiconductor Fabrication Facilities
NFPA 326             Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair
NFPA 328             Recommended Practice for the Control of Flammable and Combustible Liquids and Gases in Manholes, Sewers, and Similar Underground Structures
NFPA 329             Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases
NFPA 350             Guide for Safe Confined Space Entry and Work
NFPA 385             Standard for Tank Vehicles for Flammable and Combustible Liquids
NFPA 386             Standard for Portable Shipping Tanks for Flammable and Combustible Liquids
NFPA 395             Standard for the Storage of Flammable and Combustible Liquids at Farms and Isolated Sites
NFPA 400             Hazardous Materials Code
NFPA 402             Guide for Aircraft Rescue and Fire-Fighting Operations
NFPA 403             Standard for Aircraft Rescue and Fire-Fighting Services at Airports
NFPA 405             Standard for the Recurring Proficiency of Airport Fire Fighters
NFPA 407             Standard for Aircraft Fuel Servicing
NFPA 408             Standard for Aircraft Hand Portable Fire Extinguishers
NFPA 409             Standard on Aircraft Hangars
NFPA 410             Standard on Aircraft Maintenance
NFPA 412             Standard for Evaluating Aircraft Rescue and Fire-Fighting Foam Equipment
NFPA 414             Standard for Aircraft Rescue and Fire-Fighting Vehicles
NFPA 415             Standard on Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways
NFPA 418             Standard for Heliports
NFPA 422             Guide for Aircraft Accident/Incident Response Assessment
NFPA 423             Standard for Construction and Protection of Aircraft Engine Test Facilities
NFPA 424             Guide for Airport/Community Emergency Planning
NFPA 430             Code for the Storage of Liquid and Solid Oxidizers
NFPA 432             Code for the Storage of Organic Peroxide Formulations
NFPA 434             Code for the Storage of Pesticides
NFPA 450             Guide for Emergency Medical Services and Systems
NFPA 451             Guide for Fire Based Community Healthcare Providers
NFPA 471             Recommended Practice for Responding to Hazardous Materials Incidents
NFPA 472             Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents
NFPA 473             Standard for Competencies for EMS Personnel Responding to Hazardous Materials/Weapons of Mass Destruction Incidents
NFPA 475             Recommended Practice for Responding to Hazardous Materials Incidents/Weapons of Mass Destruction
NFPA 480             Standard for the Storage, Handling, and Processing of Magnesium Solids and Powders
NFPA 481             Standard for the Production, Processing, Handling, and Storage of Titanium
NFPA 482             Standard for the Production, Processing, Handling, and Storage of Zirconium
NFPA 484             Standard for Combustible Metals
NFPA 485             Standard for the Storage, Handling, Processing, and Use of Lithium Metal
NFPA 490             Code for the Storage of Ammonium Nitrate
NFPA 495             Explosive Materials Code
NFPA 496             Standard for Purged and Pressurized Enclosures for Electrical Equipment
NFPA 497             Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
NFPA 498             Standard for Safe Havens and Interchange Lots for Vehicles Transporting Explosives
NFPA 499             Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
NFPA 501             Standard on Manufactured Housing
NFPA 501A          Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities
NFPA 502             Standard for Road Tunnels, Bridges, and Other Limited Access Highways
NFPA 505             Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations
NFPA 513             Standard for Motor Freight Terminals
NFPA 520             Standard on Subterranean Spaces
NFPA 550             Guide to the Fire Safety Concepts Tree
NFPA 551             Guide for the Evaluation of Fire Risk Assessments
NFPA 555             Guide on Methods for Evaluating Potential for Room Flashover
NFPA 556             Guide on Methods for Evaluating Fire Hazard to Occupants of Passenger Road Vehicles
NFPA 557             Standard for Determination of Fire Loads for Use in Structural Fire Protection Design
NFPA 560             Standard for the Storage, Handling, and Use of Ethylene Oxide for Sterilization and Fumigation
NFPA 600             Standard on Facility Fire Brigades
NFPA 601             Standard for Security Services in Fire Loss Prevention
NFPA 610             Guide for Emergency and Safety Operations at Motorsports Venues
NFPA 650             Standard for Pneumatic Conveying Systems for Handling Combustible Particulate Solids
NFPA 651             Standard for the Machining and Finishing of Aluminum and the Production and Handling of Aluminum Powders
NFPA 652             Standard on the Fundamentals of Combustible Dust
NFPA 654             Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids
NFPA 655             Standard for Prevention of Sulfur Fires and Explosions
NFPA 664             Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities
NFPA 701             Standard Methods of Fire Tests for Flame Propagation of Textiles and Films
NFPA 703             Standard for Fire Retardant—Treated Wood and Fire–Retardant Coatings for Building Materials
NFPA 704             Standard System for the Identification of the Hazards of Materials for Emergency Response
NFPA 705             Recommended Practice for a Field Flame Test for Textiles and Films
NFPA 720             Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment
NFPA 730             Guide for Premises Security
NFPA 731             Standard for the Installation of Electronic Premises Security Systems
NFPA 750             Standard on Water Mist Fire Protection Systems
NFPA 770             Standard on Hybrid (Water and Inert Gas) Fire Extinguishing Systems
NFPA 780             Standard for the Installation of Lightning Protection Systems
NFPA 790             Standard for Competency of Third-Party Field Evaluation Bodies
NFPA 791             Recommended Practice and Procedures for Unlabeled Electrical Equipment Evaluation
NFPA 801             Standard for Fire Protection for Facilities Handling Radioactive Materials
NFPA 803             Standard for Fire Protection for Light Water Nuclear Power Plants
NFPA 804             Standard for Fire Protection for Advanced Light Water Reactor Electric Generating Plants
NFPA 805             Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants
NFPA 806             Performance-Based Standard for Fire Protection for Advanced Nuclear Reactor Electric Generating Plants Change Process
NFPA 820             Standard for Fire Protection in Wastewater Treatment and Collection Facilities
NFPA 850             Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations
NFPA 851             Recommended Practice for Fire Protection for Hydroelectric Generating Plants
NFPA 853             Standard for the Installation of Stationary Fuel Cell Power Systems
NFPA 900             Building Energy Code
NFPA 901             Standard Classifications for Incident Reporting and Fire Protection Data
NFPA 902             Fire Reporting Field Incident Guide
NFPA 903             Fire Reporting Property Survey Guide
NFPA 904             Incident Follow-up Report Guide
NFPA 906             Guide for Fire Incident Field Notes
NFPA 909             Code for the Protection of Cultural Resource Properties - Museums, Libraries, and Places of Worship
NFPA 914             Code for Fire Protection of Historic Structures
NFPA 921             Guide for Fire and Explosion Investigations
NFPA 950             Standard for Data Development and Exchange for the Fire Service
NFPA 951             Guide to Building and Utilizing Digital Information
NFPA 1000          Standard for Fire Service Professional Qualifications Accreditation and Certification Systems
NFPA 1001          Standard for Fire Fighter Professional Qualifications
NFPA 1002          Standard for Fire Apparatus Driver/Operator Professional Qualifications
NFPA 1003          Standard for Airport Fire Fighter Professional Qualifications
NFPA 1005          Standard for Professional Qualifications for Marine Fire Fighting for Land-Based Fire Fighters
NFPA 1006          Standard for Technical Rescuer Professional Qualifications
NFPA 1021          Standard for Fire Officer Professional Qualifications
NFPA 1026          Standard for Incident Management Personnel Professional Qualifications
NFPA 1031          Standard for Professional Qualifications for Fire Inspector and Plan Examiner
NFPA 1033          Standard for Professional Qualifications for Fire Investigator
NFPA 1035          Standard on Fire and Life Safety Educator, Public Information Officer, Youth Fire setter Intervention Specialist and Youth Fire setter Program Manager Professional Qualifications
NFPA 1037          Standard on Fire Marshal Professional Qualifications
NFPA 1041          Standard for Fire Service Instructor Professional Qualifications
NFPA 1051          Standard for Wild land Firefighting Personnel Professional Qualifications
NFPA 1061          Professional Qualifications for Public Safety Telecommunications Personnel
NFPA 1071          Standard for Emergency Vehicle Technician Professional Qualifications
NFPA 1072          Standard for Hazardous Materials/Weapons of Mass Destruction Emergency Response Personnel Professional Qualifications
NFPA 1081          Standard for Industrial Fire Brigade Member Professional Qualifications
NFPA 1082          Standard for Building Fire and Life Safety Director Professional Qualifications
NFPA 1091          Standard for Traffic Control Incident Management Professional Qualifications
NFPA 1122          Code for Model Rocketry
NFPA 1123          Code for Fireworks Display
NFPA 1124          Code for the Manufacture, Transportation, and Storage of Fireworks and Pyrotechnic Articles
NFPA 1125          Code for the Manufacture of Model Rocket and High-Power Rocket Motors
NFPA 1126          Standard for the Use of Pyrotechnics before a Proximate Audience
NFPA 1127          Code for High Power Rocketry
PYR 1128             Standard Method of Fire Test for Flame Breaks
PYR 1129             Standard Method of Fire Test for Covered Fuse on Consumer Fireworks
NFPA 1141          Standard for Fire Protection Infrastructure for Land Development in Wild land, Rural, and Suburban Areas
NFPA 1142          Standard on Water Supplies for Suburban and Rural Fire Fighting
NFPA 1143          Standard for Wild land Fire Management
NFPA 1144          Standard for Reducing Structure Ignition Hazards from Wild land Fire
NFPA 1145          Guide for the Use of Class A Foams in Fire Fighting
NFPA 1150          Standard on Foam Chemicals for Fires in Class A Fuels
NFPA 1192          Standard on Recreational Vehicles
NFPA 1194          Standard for Recreational Vehicle Parks and Campgrounds
NFPA 1201          Standard for Providing Fire and Emergency Services to the Public
NFPA 1221          Standard for the Installation, Maintenance, and Use of Emergency Services Communications Systems
NFPA 1231          Standard on Water Supplies for Suburban and Rural Fire Fighting
NFPA 1250          Recommended Practice in Fire and Emergency Service Organization Risk Management
NFPA 1300          Standard on Community Risk Assessment and Community Risk Reduction Plan Development
NFPA 1401          Recommended Practice for Fire Service Training Reports and Records
NFPA 1402          Guide to Building Fire Service Training Centers
NFPA 1403          Standard on Live Fire Training Evolutions
NFPA 1404          Standard for Fire Service Respiratory Protection Training
NFPA 1405          Guide for Land-Based Fire Departments that Respond to Marine Vessel Fires
NFPA 1407          Standard for Training Fire Service Rapid Intervention Crews
NFPA 1408          Standard for Training Fire Service Personnel in the Operation, Care, Use, and Maintenance of Thermal Imagers
NFPA 1410          Standard on Training for Emergency Scene Operations
NFPA 1451          Standard for a Fire and Emergency Service Vehicle Operations Training Program
NFPA 1452          Guide for Training Fire Service Personnel to Conduct Community Risk Reduction
NFPA 1500          Standard on Fire Department Occupational Safety and Health Program
NFPA 1521          Standard for Fire Department Safety Officer Professional Qualifications
NFPA 1561          Standard on Emergency Services Incident Management System and Command Safety
NFPA 1581          Standard on Fire Department Infection Control Program
NFPA 1582          Standard on Comprehensive Occupational Medical Program for Fire Departments
NFPA 1583          Standard on Health-Related Fitness Programs for Fire Department Members
NFPA 1584          Standard on the Rehabilitation Process for Members during Emergency Operations and Training Exercises
NFPA 1600          Standard on Disaster/Emergency Management and Business Continuity/Continuity of Operations Programs
NFPA 1616          Standard for Mass Evacuation and Sheltering
NFPA 1620          Standard for Pre-Incident Planning
NFPA 1670          Standard on Operations and Training for Technical Search and Rescue Incidents
NFPA 1700          Guide for Structural Fire Fighting
NFPA 1710          Standard for the Organization and Deployment of Fire Suppression Operations, Emergency Medical Operations, and Special Operations to the Public by Career Fire Departments
NFPA 1720          Standard for the Organization and Deployment of Fire Suppression Operations, Emergency Medical Operations and Special Operations to the Public by Volunteer Fire Departments
NFPA 1730          Standard on Organization and Deployment of Fire Prevention Inspection and Code Enforcement, Plan Review, Investigation, and Public Education Operations
NFPA 1801          Standard on Thermal Imagers for the Fire Service
NFPA 1802          Standard on Personal Portable (Hand-Held) Two-Way Radio Communications Devices for Use by Emergency Services Personnel in the Hazard Zone
NFPA 1851          Standard on Selection, Care, and Maintenance of Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
NFPA 1852          Standard on Selection, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA)
NFPA 1855          Standard for Selection, Care, and Maintenance of Protective Ensembles for Technical Rescue Incidents
NFPA 1858          Standard on Selection, Care, and Maintenance of Life Safety Rope and Equipment for Emergency Services
NFPA 1877          Standard on Selection, Care, and Maintenance of Wild land Fire Fighting Clothing and Equipment
NFPA 1901          Standard for Automotive Fire Apparatus
NFPA 1906          Standard for Wild land Fire Apparatus
NFPA 1911          Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus
NFPA 1912          Standard for Fire Apparatus Refurbishing
NFPA 1914          Standard for Testing Fire Department Aerial Devices
NFPA 1915          Standard for Fire Apparatus Preventive Maintenance Program
NFPA 1917          Standard for Automotive Ambulances
NFPA 1925          Standard on Marine Fire-Fighting Vessels
NFPA 1931          Standard for Manufacturer's Design of Fire Department Ground Ladders
NFPA 1932          Standard on Use, Maintenance, and Service Testing of In-Service Fire Department Ground Ladders
NFPA 1936          Standard on Powered Rescue Tools
NFPA 1937          Standard for the Selection, Care, and Maintenance of Rescue Tools
NFPA 1951          Standard on Protective Ensembles for Technical Rescue Incidents
NFPA 1952          Standard on Surface Water Operations Protective Clothing and Equipment
NFPA 1953          Standard on Protective Ensembles for Contaminated Water Diving
NFPA 1961          Standard on Fire Hose
NFPA 1962          Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances
NFPA 1963          Standard for Fire Hose Connections
NFPA 1964          Standard for Spray Nozzles
NFPA 1965          Standard for Fire Hose Appliances
NFPA 1971          Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
NFPA 1975          Standard on Station/Work Uniforms for Emergency Services
NFPA 1976          Standard on Protective Ensemble for Proximity Fire Fighting
NFPA 1977          Standard on Protective Clothing and Equipment for Wild land Fire Fighting
NFPA 1981          Standard on Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services
NFPA 1982          Standard on Personal Alert Safety Systems (PASS)
NFPA 1983          Standard on Life Safety Rope and Equipment for Emergency Services
NFPA 1984          Standard on Respirators for Wild land Fire Fighting Operations
NFPA 1986          Standard on Respiratory Protection Equipment for Technical and Tactical Operations
NFPA 1987          Standard on Combination Unit Respirator Systems for Tactical and Technical Operations
NFPA 1989          Standard on Breathing Air Quality for Emergency Services Respiratory Protection
NFPA 1991          Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies
NFPA 1992          Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials Emergencies
NFPA 1994          Standard on Protective Ensembles for First Responders to CBRN Terrorism Incidents
NFPA 1999          Standard on Protective Clothing and Ensembles for Emergency Medical Operations
NFPA 2001          Standard on Clean Agent Fire Extinguishing Systems
NFPA 2010          Standard for Fixed Aerosol Fire-Extinguishing Systems
NFPA 2112          Standard on Flame-Resistant Garments for Protection of Industrial Personnel against Flash Fire
NFPA 2113          Standard on Selection, Care, Use, and Maintenance of Flame-Resistant Garments for Protection of Industrial Personnel against Short-Duration Thermal Exposures
NFPA 5000          Building Construction and Safety Code®
NFPA 8501          Standard for Single Burner Boiler Operation
NFPA 8502          Standard for the Prevention of Furnace Explosions/Implosions in Multiple Burner Boilers
NFPA 8503          Standard for Pulverized Fuel Systems
NFPA 8504          Standard on Atmospheric Fluidized-Bed Boiler Operation
NFPA 8505          Standard for Stoker Operation
NFPA 8506          Standard on Heat Recovery Steam Generator Systems
IEEE Standard
IEEE 260              Standard Letter Symbols for Units of Measurement, IEEE-260-1978 (now 260.1-2004)
IEEE 488              Standard Digital Interface for Programmable Instrumentation, IEEE-488-1978 (now 488.1)
IEEE 610              Standard Glossary of Software Engineering Terminology
IEEE 754              Floating point arithmetic specifications
IEEE 802              LAN/MAN
IEEE 802.1           Standards for LAN/MAN bridging and management and remote media access control (MAC) bridging
IEEE 802.2           Standards for Logical Link Control (MAC) standards for connectivity
IEEE 802.3           Ethernet Standards for Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
IEEE 802.4           Standards for token passing bus access
IEEE 802.5           Standards for token ring access and for communications between LANs and MANs
IEEE 802.6           Standards for information exchange between systems
IEEE 802.7           Standards for broadband LAN cabling
IEEE 802.8           Fiber-optic connection
IEEE 802.9           Standards for integrated services, like voice and data
IEEE 802.10         Standards for LAN/MAN security implementations
IEEE 802.11         Wireless Networking – "WiFi"
IEEE 802.12         Standards for demand priority access method
IEEE 802.14         Standards for cable television broadband communications
IEEE 802.15.2     Bluetooth
IEEE 802.15.4     Wireless Sensor/Control Networks – "ZigBee"
IEEE 802.15.6     Wireless Body Area Network (BAN) – (e.g. Bluetooth low energy)
IEEE 802.16         Wireless Networking – "WiMAX"
IEEE 802.24         Standards for Logical Link Control (LLC) standards for connectivity
IEEE 828              Configuration Management in Systems and Software Engineering
IEEE 829              Software Test Documentation
IEEE 830              Software Requirements Specifications
IEEE 896              Future bus
IEEE 1003            Unix compatibility programming standard – POSIX
IEEE 1016            Software Design Description
IEEE 1028            Standard for Software Reviews and Audits
IEEE 1044.1         Standard Classification for Software Anomalies
IEEE 1059            Software Verification and Validation Plan
IEEE 1073            Point of Care Medical Device Communication Standards
IEEE 1074            Software Development Life Cycle
IEEE 1076            VHDL – VHSIC Hardware Description Language
IEEE 1149.1         JTAG
IEEE 1149.6         AC-JTAG
IEEE 1180            Discrete cosine transform accuracy
IEEE 1233            System Requirements Specification
IEEE 1275            Open Firmware
IEEE 1284            Parallel port
IEEE P1363          Public key cryptography
IEEE 1394            Serial bus – "FireWire", "i.Link"
IEEE 1471            software architecture / system architecture
IEEE 1541            Prefixes for Binary Multiples
IEEE 1584            Guide for Performing Arc Flash Hazard Calculations
IEEE 1588            Precision Time Protocol
IEEE P1619          Security in Storage Working Group (SISWG)
IEEE 1667            Standard Protocol for Authentication in Host Attachments of Transient Storage Devices
IEEE 1801            Unified Power Format
IEEE 1900            Dynamic Spectrum Access Networks (DySPAN)
IEEE 1901            Broadband over Power Line Networks
IEEE 1906.1         Recommended Practice for Nano scale and Molecular Communication Framework
IEEE 2600            Hardcopy Device and System Security (and related ISO/IEC 15408 Protection Profiles)
IEEE 12207          Information Technology – Software life-cycle processes
IEEE Switchgear Committee         C37 series of standards for Low and High voltage equipment

Highlights on IEC Standards

Smart factories: wireless industrial applications; digital process measurement transmitters – IEC 61784-3, IEC 62657-1, IEC 62657-2, IEC 62948, IEC 62828-2 Wireless power transfer: solutions for interoperability of systems – IEC PAS 63095-2, IEC 63028, IEC 62827-2 Common charging: for all consumer devices – IEC 62680-1-3 DC power transfer: safety aspects – IEC 62368-3 Fibre optics: multimode fibre; photonic integrated circuits – IEC 60793-2-10, IEC TR 63072-1 5G: radio-frequency field strength: human exposure – IEC 62232 Energy efficiency: refrigerators and coolers; adjusted volume calculations; performance monitoring and comparison – IEC TR 63061, IEC 62974-1 Safety of household goods: dishwashers; whirlpool baths and spas, electric toys – IEC 60335-2-58, IEC 60335-2-60, IEC 62115 Rural electrification: solar power – IEC TS 62257-7 Wind power generation: remote sensing devices; power performance; wind turbines – IEC 61400-12-1 Fuel cells: industrial vehicles – IEC 62282-4-102 Solar thermal power: plant production – IEC TS 62862-1-2, IEC TS 62862-1-3 Electrical energy storage: environmental and safety issues; testing methods – IEC TS 62933-4-1, IEC TS 62933-5-1, IEC 62933-2-1 Railways: lithium-ion batteries – IEC 62928 Electric cables: EV charging cables – IEC 62893-1, IEC 62893-2, IEC 62893-3 Car multimedia systems: smart wrap-around view monitors; event video data recorders – IEC TS 63033-1, IEC 63005-1 Uninterruptible power systems: safety for ordinary persons; risk reduction – IEC 62040-1 Energy efficient motors: adjustable speed drives; EMC; ecodesign; methodology – IEC 61800-3, IEC 61800-9-1, IEC 61800-9-2;Hand-held electric tools: safety, performance, noise measurement – IEC 62841-2-1, IEC 62841-3-14, IEC 60335-2-107 Display devices: OLED; flexible – IEC 62341-6-3, IEC 62715-5-3 LEDs: road vehicle lighting; luminous flux measurement – IEC 60810, IEC TS 62861 Semiconductors: flexibility; conductive thin films – IEC 62951-1 Winding wires: insulation; dielectric breakdown – IEC 60317-0-7, IEC 60317-0-10 Switchgear and controlgear: rail mounting; protective earthing – IEC 60715 EMC: EV connection to the mains; HEMP and IEMI; building protection – IEC 61851-21-1, IEC 61851-1, IEC TS 61000-5-10 Electrostatics: electrical resistance; footwear – IEC 61340-4-3 Alarm systems: digital building intercom systems – IEC 62820-1-2 Fire hazards: low voltage electrotechnical products – IEC TS 60695-1-14 Dependability: spare parts; life cycle costing; reliability prediction – IEC 62550, IEC 60300-3-3, IEC 61709 Terminology: railway equipment; dependability – IEC 60050-811, IEC 60050-821, IEC 60050-692 Technical product documentation: information exchange; digitized product descriptions – IEC 62569-1

1 comment:

  1. We absolutely love your blog and find a lot of your post's
    to be exactly what I'm looking for. can you offer guest writers to
    write content for yourself? I wouldn't mind producing
    a post or elaborating on a lot of the subjects you write with regards to here.
    Again, awesome site!


Thank you very much to visit and valuable comments on this blog post. Keep in touch for next and new article. Share your friends and well-wisher, share your idea to worldwide.

You may like the following pages